140-E-253
PCB Connector
Screw connection, dovetail version, two-tier tall version
DESCRIPTION
The PCB connector 140-E-253 with lift system is designed as two-tier tall version with a pitch of 5 mm and available with 4 or 6 poles. The multi-tier version offers higher connection density. Offset individual rows of PCB connectors provide easy access to the terminal leads. This PCB connector can also be used for encapsulating circuits. This 4- or 6-pole PCB connector has lateral locking elements which allow to lock the connectors to any pole number without pole loss. The wire entrance is parallel to the PCB. Connecting PCB connectors 140-E-253 with 140-A-111 yields the three-tier versions 140-E-271 and/or 140-E-273.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 4 + 6
TECHNICAL DATA
Clamping Range:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 14 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.2 mm
Torque: 0.5 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
10 [1] | 300 | B | 30 - 14 | 0.51 |
|
15 | 300 | B | 30 - 14 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M3; zinc plated steel, blue passivated
Solder pin: 0,9 x 0,5 mm; Copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Can be fitted together to larger pole numbers
