150-C-111
PCB Connector
45° screw and wire entry, dovetail version, with test holes
DESCRIPTION
The PCB connector 150-C-111 is the inclined version with lift system with a pitch of 5 mm and available with 2 or 3 poles. The wire entrance is in a 45° angle to the PC board. Therefore, this PCB connector is ideal for the assembly in the center of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. Due to the ample terminal space and the lift system, this PCB connector is particularly user-friendly. The lift system guarantees optimum wire protection even after several disconnections of one or multiple wires. Lateral latching elements on the housing allow to connect the PCB connector to longer terminal strips without pole loss. The screws are captive. This PCB connector has test holes for ø 2.3 mm test plug.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 + 3
TECHNICAL DATA
Clamping Range:
0.14 - 4 mm² / 0.14 - 2.5 mm² / 26 - 14 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 7.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
20 | 300 | B | 22 - 10 | 0.51 [1] | |
10 | 300 | D | 22 - 10 | 0.51 | |
20 | 300 | B | 26 - 10 | 0.51 | |
10 | 300 | D, E | 26 - 10 | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Pressure clamp: Copper alloy, tin plated
Screw: M3; zinc plated steel, blue passivated
Solder pin: 1,0 x 0,8 mm; copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Can be fitted together to larger pole numbers