180-A-121
PCB Connector
Screw connection, vertical wire entry
DESCRIPTION
The PCB connector 180-A-121 features parallel entry for both conductor and screwdriver. It can also be used as printed circuit board termination with front panel penetration. These PCB connectors are available in 5 mm pitch with up to 12 poles, but they can also be plugged together as longer terminal strips. Each pole has a double solder termination with 5 mm pin spacing. The wire entrance is vertical to the PCB.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 1 - 12
Application: Particularly suitable for confined mounting space or only single-sided access.
TECHNICAL DATA
Clamping Range:
0.14 - 4 mm² / 0.14 - 2.5 mm² / 26 - 12 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 9 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
320 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 24 A
Rated insulation voltage: 450 V acc. to EN 60998-1
Hole in PCB: ø 1.4 mm
Torque: 0.4 Nm
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
20 | 300 | B | 24 - 12 | 0.4 |
| 10 | 300 | D | 24 - 12 | 0.4 | |
|
20 | 300 | B | 24 - 12 | 0.4 |
| 10 | 300 | D, E | 24 - 12 | 0.4 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Pressure clamp: Tin plated copper
Screw: M2,5; zinc plated steel, blue passivated
Solder pin: 1,0 x 0,8 mm; tin plated copper
Pressure plate: Brass, bright
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Connected to larger number of poles
