433-LB (-DS)
Tab/Screw Terminal Block
Tab 6.3 mm, with marking "L N [Earth]"
DESCRIPTION
Tab/screw connector block 433-LA is available in 3-pole design. It is equipped with a one-piece metal part on mains and equipment side avoiding contact resistance inside the connector. Thanks to mounting holes between the poles and with a only one screw, this connector can be mounted twist-proof on an appropriately prepared substrate. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw. This type features the additional permanent marking: „L N [Earth]“
GENERAL INFORMATION
Pitch: 16.00 mm
No. of poles: 3
Additional information: These components cannot be mounted side-by-side. Multiple connectors can only be mounted side-by-side in 16 mm pitch to ensure clearance and creepage distances are observed.
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 4 mm² [2]
Wire stripping length: 7 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
500 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 25 A: with receptacle for tabs 6.3; wire 6.0 mm² (10 AWG)32 A: screw side
Rated insulation voltage: 750 V acc. to EN 60998-1
Torque: 0.5 Nm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
25 | 300 | B | 18-10 [3] | 0.51 | |
25 | 150 | C | 18-10 [3] | 0.51 | |
25 | 300 | B | 22-12 [3] | 0.51 | |
10 | 300 | D,E | 22-12 [3] | 0.51 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Screw: M3,5; zinc plated steel, blue passivated
Tab: Nickel plated brass
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Different pole markings on housing
- Extended screw guide
- Insulation receptacles ISO