874 (-DR)
PCB Connector
Screwless connection, 45° angled wire entry
DESCRIPTION
The PCB connectors 874 und 874-DR with Push-In connection and a pitch of 5 mm, are available with 2 to 12 poles. They provide easy connection of solid and stranded conductors and feature a stainless steel spring clamp which ensures safe permanent contact. The spring clamp of version 874 is operated by pressing a pusher inside the housing with a screwdriver whereas the spring clamp of version 874-DR is manually operated by a protruding lever. The wire entrance is in a 45° angle to the PC board. Each pole has a double solder termination with 10 mm pin spacing.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 1 - 12
TECHNICAL DATA
Clamping Range:
0.14 - 2.5 mm² / 0.14 - 1.5 mm² / 26 - 16 AWG
Rated cross section: 1.5 mm²
Wire stripping length: 10 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
250 V
320 V
630 V
Rated Impulse Voltage
4 kV
4 kV
4 kV
Rated current: 10 A
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 10 | 300 | B | 22 - 16 | |
 | 10 | 300 | B, D, E | 22 - 16 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, red, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Spring: Stainless strip steel
Solder pin: 0,6 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Other Pitch
- Longer pole version
