900-F-S-7.5

PCB Tab Connector

Tab 2x 2.8 mm / 1x 6.3 mm, with pegs

https://wecoconnectors.com/wp-content/uploads/Images/900-F-S-7.5-R.JPG

DESCRIPTION

The tab connector 900-F-S-7,5 with a pitch of 7,5 mm is a raised 900-S-7,5 version and designed for tab receptacles of 1x 2,8 mm or 1x 6,3 mm. The tab connector housing of series 900-F was raised for this special variant. The enormous variety of different tab connector designs and their mixed mounting increase the versatility of this series. When potting the tab connector moulding, the casting resin can penetrate between the raised feet from below without affecting the blade connection area. Depending on the respective application, the series 900-F allows to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. Also non-insulated 2,8 mm or 6,3 mm tab receptacles can be plugged on these tab connectors. Insulation receptacles ISO-25 (see also ISO product data sheet) can be used to insulate 2,8 mm or 6,3 mm tab receptacles. Insulation sockets are available for 6,3 mm tab connectors with double-spring contacts (see also ISO-900 product data sheet).

GENERAL INFORMATION

Pitch: 7.50 mm

No. of poles: 2 - 17

TECHNICAL DATA

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

500 V

630 V

1000 V

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 6.3; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Other specifications: Indicated rated voltages refer to applications with insulation receptacles

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B
Download PDF How to Order

TECHNICAL DRAWINGS

900-F-S-7.5.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-7,50
  • G30: Gold Plating (30 micro inches) 
  • Insulation sockets ISO-900
  • Change of pitch
  • Component mix of tab connector versions
  • Tab connectors are also individually available (see single tabs GST-900)

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
03 900-F-S-7.5/03 75.870.704 18.50
05 900-F-S-7.5/05 75.870.707 33.50
06 900-F-S-7.5/06 75.870.709 41.00
09 900-F-S-7.5/09 75.870.713 63.50
10 900-F-S-7.5/10 75.870.715 71.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.