900-S-10

PCB Tab Connector

Tab 2x 2.8 mm / 1x 6.3 mm

https://wecoconnectors.com/wp-content/uploads/Images/900-S-10-R.JPG

DESCRIPTION

The tab connector 900-S-10 with double solder termination and a pitch of 10 mm is designed for 1x 2,8 mm or 1x 6,3 mm tab connector receptacles. Depending on the respective application, the tab connectors of series 900 allow to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. Also non-insulated 2,8 mm or 6,3 mm tab receptacles can be plugged on these tab connectors. Insulation receptacles ISO-25 (see also ISO product data sheet) can be used to insulate 2,8 mm or 6,3 mm tab receptacles. Insulation sockets are available for 6,3 mm tab connectors with double-spring contacts (see also ISO-900 product data sheet).

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 13

TECHNICAL DATA

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

630 V

630 V

1000 V

Rated Impulse Voltage

6 kV

6 kV

6 kV

Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 6.3; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Other specifications: Indicated rated voltages refer to applications with insulation receptacles

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 300 B
15 150 C
15 300 B
10 300 D, E
Download PDF How to Order

TECHNICAL DRAWINGS

900-S-10.JPG - technical drawing 1

MATERIALS

Moulding: PA, red, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Solder pin: 1,0 x 0,8 mm; tin plated brass

Tab: 2.8 x 0.8 mm; 6.3 x 0.8 mm; tin plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • Insulation receptacles ISO
  • Insulation sockets ISO-900
  • Change of pitch
  • Component mix of tab connector versions
  • Tab connectors are also individually available (see single tabs GST-900)

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 900-S-10/02 80.870.903 13.50
03 900-S-10/03 80.870.905 23.50
04 900-S-10/04 80.870.907 33.50
05 900-S-10/05 80.870.909 43.50
06 900-S-10/06 80.870.911 53.50
07 900-S-10/07 80.870.913 63.50
08 900-S-10/08 80.870.915 73.50
09 900-S-10/09 80.870.917 83.50
10 900-S-10/10 80.870.919 93.50
11 900-S-10/11 80.870.921 103.50
12 900-S-10/12 80.870.923 113.50
13 900-S-10/13 80.870.925 123.50

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.