900-SUC-10
PCB Tab Connector
Tab 4.8 mm
DESCRIPTION
The tab connector 900-SUC-10 with double solder termination and a pitch of 10 mm is designed for 4,8 mm tab connector receptacles. Depending on the respective application, the tab connectors of series 900 allow to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. Insulation receptacles ISO-187 (see also ISO product data sheet) can be used to insulate 4,8 mm tab receptacles. Insulation sockets are available for 6,3 mm tab connectors with double-spring contacts (see also ISO-900 product data sheet).
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 13
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
630 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 16 A: with receptacles 4.8; wire 2.5 mm² (14 AWG)
Rated insulation voltage: 750 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Other specifications: Indicated rated voltages refer to applications with insulation receptacles
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 15 | 300 | B | ||
| 150 | C | ||||
 | 300 | 15 | B | ||
| 10 | D, E |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, red, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 1.0 x 0.8 mm; tin plated brass
Tab: 4.8 x 0.8 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Insulation receptacles ISO
- Insulation sockets ISO-900
- Change of pitch
- Component mix of tab connector versions
- Tab connectors are also individually available (see single tabs GST-900)
