900-W-10
PCB Tab Connector
Tabs with 90° angle
DESCRIPTION
The tab connector 900-W-10 with double solder termination and a pitch of 10 mm is designed for 1x 2,8 mm and 1x 2,8 mm / 1x 6,3 mm tab connector receptacles. Depending on the respective application, the tab connectors of series 900 allow to plug in bare, partially or fully insulated tab receptacles according to DIN 46247. A non-insulated 2,8 mm or a 6,3 mm (optionally also insulated) tab connector receptacle can be plugged in the angled plug-in area of the tab connector. To the vertical tab connector, a non-insulated 2,8 mm tab connector receptacle can be also be connected. Insulation receptacles ISO-25 and ISO-250 (see also ISO product data sheet) can be used to insulate 6,3 mm tab receptacles.
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 13
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
630 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 6.3; wire 2.5 mm² (14 AWG)
Rated insulation voltage: 750 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Other specifications: Indicated rated voltages refer to applications with insulation receptacles
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | ||
| 15 | 150 | C | |||
|
15 | 300 | B | ||
| 10 | 300 | D, E |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, red, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Solder pin: 1.0 x 0.8 mm; tin plated brass
Tab: 2.8 x 0.8 mm; 6.3 x 0.8 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Insulation receptacles ISO
- Change of pitch
- Component mix of tab connector versions
- Tab connectors are also individually available (see single tabs GST-900)
