930 (-DS)

PCB Tab Connector

Screw connection

930-R.jpg

DESCRIPTION

The PCB connector 930 with a pitch of 3,5 mm is available in 2- to 24-pole design. It can be mounted side-by-side without pole loss, and is equipped with captive screws. The wire protector of the “DS”-version reliably prevents damage to multi-wire flexible conductors by the turning screw.

GENERAL INFORMATION

Pitch: 3.50 mm

No. of poles: 2 - 24

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

0.75 - 1.5 mm² / 0.75 - 1.5 mm² / 18 - 16 AWG

with wire protector:

0.34 - 1.5 mm² / 0.34 - 1 mm² / 22 - 16 AWG

Rated cross section: 1 mm²

Wire stripping length: 5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 13.5 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Hole in PCB: ø 1.2 mm

Torque: 0.2 Nm

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 300 B 26 - 16 0.23
10 300 B 26 - 16 0.2
Download PDF How to Order

TECHNICAL DRAWINGS

930.jpg - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M2; zinc plated steel, blue passivated

Solder pin: ø 0,9 mm; tin plated brass

Wire protector: German silver

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-3,50
  • Pitch of 7 mm for larger clearance and creepage distances

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
03 930/03 10.870.403 930-DS/03 20.870.403 10.50
04 930/04 10.870.404 930-DS/04 20.870.404 14.00
05 930/05 10.870.405 930-DS/05 20.870.405 17.50
06 930/06 10.870.406 930-DS/06 20.870.406 21.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.