931-SLR-THR-1.1
Pin Strip for THR
Soldering/plug-in area ø 1.1 mm
DESCRIPTION
The pin strip 931-SLR-THR-1,1 for the application in a reflow soldering process and with a pitch of 3,5 mm is available in 2 to 16 pole design. It comes with a constant pin diameter of 1,1 mm in the solder and plug-in area. The high temperature resistant plastic housing has a very high CTI value and is equipped with spacers, so-called "Stand-offs", which ensure a better hot-air circulation during the reflow soldering process in the convection oven. Beyond this, they assure an improved optical control of the solder joints. For the automatic assembling process, all pin strip versions are packed Tape-on-Reel and are equipped with high temperature resistant Pick Caps, which can comfortably be removed after the soldering process.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 16
Usable with: plug connector of 930-FL(DS) series
Additional information: Also. please take into consideration the pin strips 931-SLR-THR. 931-SLR-THR-1.3 and 931-SLR-SMD-1.3 in genuine surface mount technology.
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
6 | 300 | B, D | |||
6 | 300 | B, D |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Solder pin: ø 1.1 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- TR: Tape and Reel Assembly (Includes pick surface)
- Other solder pin surfaces on request