938-FLDS
PCB Connector
Screw connection, enlarged clamping area
DESCRIPTION
Due to the rectangular shape, the terminal space of plug connector 938-FLDS is dimensioned relatively large. Spring and wire protection are designed in one piece. The plug connector 938-FLDS is designed for the insertion of pin strips 931-SLS both from the top and the bottom side. The possibility to plug from either side allows mounting in reverse order: The plug connector can be pre-assembled in a housing and then the PC board can be slotted in from above. When using pin strips with extra-long pins (available upon request), two plug connectors can be mounted one on top of the other (stacked) thus achieving a parallel connection.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 16
Usable with: Pin strip of 931-SLS; 931-SLR-THR; 931-SLR-THR-1.3; 931-SLR-SMD-1.3 series (pin strip with ø1.3 mm in plug-in area); tab connector of 931-FST series
TECHNICAL DATA
Clamping Range:
0.2 - 1.5 mm² / 0.2 - 1 mm² / 26 - 16 AWG
Rated cross section: 1 mm²
Wire stripping length: 5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Rated insulation voltage: 130 V acc. to EN 60998-1
Torque: 0.2 Nm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 6 | 300 | B | 28 - 20 | 0.23 |
 | 6 | 300 | B | 28 - 20 | 0.2 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Nickel plated brass
Spring: Copper alloy, tin plated
Screw: M2; zinc plated steel, blue passivated
Wire protector: Copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Plug connectors with special locking system on request
