951-HG (-DS)
PCB Connector
Screw connection, vertical wire entry, extended insertion length
DESCRIPTION
The PCB connector 951-HG has a solder pin welded on top of the socket bore, which expands the insertion length to series 950 socket depth. Extra-long solder pins are available upon request. The wire entrance is vertical to the PCB. Wire protection in DS-design reliably prevents damage to stranded wires by the screw.
GENERAL INFORMATION
Pitch: 5.00 mm
No. of poles: 2 - 32
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 1.5 mm²
Wire stripping length: 6 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 17.5 A
Hole in PCB: ø 1.3 mm
Torque: 0.4 Nm
Other specifications: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types are "no-flame" acc. to glow-wire test.
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 15 | 300 | B | 26 - 14 | 0.4 |
 | 300 | 15 | B | 26 - 14 | 0.4 |
| Current [A] | Voltage [V] | Cross Section [mm2] | AWG | TORQUE | |
|---|---|---|---|---|---|
 | 17.5 | 250 | 1.5 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-32 poles: CTI 400
Insulating group: 2-8 poles: I; 9-32 poles: II
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M2.6; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Longer solder pins up to 75 mm
