974-FB
Socket Terminal Strip
Plug connection 45° wire entry
DESCRIPTION
The socket terminal strip 974-FB, inclined version with a pitch of 5 mm is available with 2- to 26-pole design and can be mounted side-by-side without pole loss. The wire entrance is in a 45° angle diagonal to the PC board. Therefore, this PCB connector is ideal for the assembly in the centre of PCBs. The design of this PCB connector allows space-saving arrangement of consecutive rows of terminals. The contact pressure is achieved by means of a stainless steel spring with extra-long spring deflection. Due to the high spring forces, it is advisable to select socket terminal strips with only up to 8 poles. For longer clearance and creepage distances, socket terminal strips are also available in a larger pitch.
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 6 A
Hole in PCB: ø 1.3 mm
Other specifications: Rated voltage adapted to counterpart 951-SV(-DS)
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 20 | 300 | B | ||
| 10 | 300 | D | |||
 | 20 | 300 | B | ||
| 10 | 300 | D, E |
| Current [A] | Voltage [V] | Cross Section [mm2] | AWG | TORQUE | |
|---|---|---|---|---|---|
 | 13.5 | 250 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Spring: Stainless strip steel
Solder pin: ø 1 mm; tin plated copper
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- Pitch of 10 mm for larger clearance and creepage distances
- Other solder pin lengths on request
- Version with lateral latching elements
- With base plate, please see 974-BP
