979 (-DS)
PCB Connector
Screw connection, enlarged clamping area
DESCRIPTION
The PCB connector 979 with a pitch of 10 mm is available in 2- to 16-pole design. Compared to the PCB connector 972, it has a larger conductor space for wires up to 6 mm² and has also large clearance and creepage distances. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening.
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 16
TECHNICAL DATA
Clamping Range:
without wire protector
with wire protector:
Rated cross section: 2.5 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
630 V (500 V)
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 24 A
Rated insulation voltage: 750 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
Torque: 0.5 Nm
Other specifications: Rated voltage in brackets applies to 5-16-pole connectors, “no-flame” according to glow wire test applies to 2-4-pole connectors.
RATINGS
Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
---|---|---|---|---|---|
| 20 | 300 | B | 22-12 [1] | 0.51 |
| 20 | 300 | B | 26 - 12 | 0.51 |
10 | 300 | D, E | 26 - 12 | 0.51 |
Current [A] | Voltage [V] | Cross Section [mm2] | AWG | TORQUE | |
---|---|---|---|---|---|
| 24 | 750 | 4.0 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: 2-4 poles: CTI ≥ 600; 5-16 poles: CTI 400
Insulating group: 2-4 poles: I; 5-16 poles: II
Temperature range: -40°C up to 100°C
Terminal body: Tin plated brass
Screw: M3; zinc plated steel, blue passivated
Solder pin: ø 1 mm; tin plated copper
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Longer solder pins up to 95 mm
- Version with extended wire entrance
- With test holes, compare 970-MP, 970-TMP