983-D/..-DAM
Barrier Strip Connector
Screw connection, enlarged side walls, 2 solder pins per pole
DESCRIPTION
The PCB connector 983-D/..-DAM is based on the well proven terminals of the series 983. The optimized geometry and slightly modified housing offer some advantages compared to the standard versions: • The reinforced side walls can equalize the resulting torque to the outside. As a result, the reinforced side avoid the stacking without pole loss as given in the standard version. • The housing geometry creates the possibility to implement central soldering pins. The connection is designed as head contact, screw and washers forming a combination. This terminal is available from 2 to 6 poles as well as a version with only one soldering pin (see 983-S/..-DAM).
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 6
TECHNICAL DATA
Clamping Range:
0.5 - 2.5 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 8.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
500 V
630 V
1000 V
Rated Impulse Voltage
6 kV
6 kV
6 kV
Rated current: 24 A
Rated insulation voltage: 750 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Torque: 1.2 Nm
Other specifications: Per pole two wires of identical cross-section can be connected.
RATINGS
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
---|---|---|---|---|---|
20 | 300 | B | 20 - 12 | 1.13 | |
20 | 300 | B | 22 - 10 | 1.13 | |
10 | 300 | D,E | 22 - 10 | 1.13 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Pressure clamp: Tin plated brass
Screw: M4; zinc plated steel, blue passivated
Solder pin: 0,8 x 1,0 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive Numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Crosshead screws
- 10 mm pin length