983-F

Tab/Screw Connector Block

With tabs 4.8 or screw connection

https://wecoconnectors.com/wp-content/uploads/Images/983-F-R.JPG

DESCRIPTION

Tab/screw connector block 983-F in 10 mm pitch is based on our proven 98.. series (see Catalogue 5 “Pitch >10 mm”). It features a 4.8 mm tab connector in star-shaped arrangement and is available in 2- to 24-pole design for a maximum of six tab connectors or alternatively one screw connector per pole. The compartments on both extremities of the block can serve either for mounting on a substrate or for fastening our 982-A/983-A cover caps. Upon request, other compartments can remain empty for mounting purposes. Installation note: Since the bottom is not closed, the connector should be mounted on an isolating substrate/surface. Alternatively, our marking strip BST-983-F can be used for this purpose. Due to the large variety of different types, listing numbers and prices of the various articles is not possible. When inquiring or ordering products with uniform assembly, stating the number of poles and the assembly number is sufficient. For mixed assemblies, we require an exemplary scheme including the orientation of asymmetrical assemblies, stating the number of desired poles and the assembly of each pole with assembly number.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 24

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.5 - 2.5 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG

Rated cross section: 2.5 mm² [1]

Wire stripping length: 8.5 mm

Over Voltage Category

III

Pollution Severity Level

3

Rated Voltage

320 V

Rated Impulse Voltage

4 kV

Rated current: 16 A: with receptacle 4.8; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 450 V acc. to EN 60998-1

Torque: 1.2 Nm

Other specifications: For screw connectors, two leads of identical cross-section can be connected per pole.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
15 [2] 300 B 20 - 12 1.13
15 [2] 300 B 20 - 12 1.13
10 300 D,E 20 - 12 1.13
Download PDF How to Order

TECHNICAL DRAWINGS

983-F.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Temperature range: -40°C up to 100°C

Terminal body: Nickel plated brass

Screw: M4; zinc plated steel, blue passivated

Tab: Nickel plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • Cover caps
  • Crosshead for screw connection upon request
  • Fastening pole position can be freely selected

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.