983-SMF-2.8 /-4,8

Barrier Strip Connector

Screw connection, with solder pin and tab

https://wecoconnectors.com/wp-content/uploads/Images/983-SMF-2.8-R.JPG

DESCRIPTION

The PCB connectors 983-SMF-2,8 and 983-SMF-4,8 with a pitch of 10 mm are available in 1- to 12-pole design and can be mounted side-by-side in the nominal pitch. They are based on our series 983 terminal strips. The conductor terminal is of head contact design with Screws M4, whereby the screws and square washers are movably connected. For easier connection, the non-rotably mounted square washers are automatically lifted when the screw is loosened. On the solder side and the plug-in side they feature one solder pin and one tab connection of 2.8 mm or 4.8 mm width per pole. This allows current to flow to other components without having to use additional conductor paths.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 1 - 12

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.5 - 2.5 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 8.5 mm

Over Voltage Category

III

Pollution Severity Level

3

Rated Voltage

320 V

Rated Impulse Voltage

4 kV

Rated current: 6 A: with receptacles 2.8; wire 1 mm² (16 AWG)16 A: with receptacles 4.8; wire 2.5 mm² (14 AWG)

Rated insulation voltage: 450 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Torque: 1.2 Nm

Other specifications: Screw-fixing holes ø 3,2 mm. Per pole two wires of identical cross-section can be connected. Indicated rated voltage applies to applications with insulation receptacles.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 20 - 12 1.13
6 300 B, D, E 20 - 12 1.13 [1]
15 300 B 20 - 12 1.33 [2]
Download PDF How to Order

TECHNICAL DRAWINGS

983-SMF-2.8.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Pressure clamp: Tin plated brass

Screw: M4; zinc plated steel, blue passivated

Solder pin: 0,8 x 1,0 mm; tin plated brass

Tab: Nickel plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • Securing pins BEF-983, fastening pole position can be freely selected
  • Crosshead screws
  • Various versions of tabs instead of screw connections

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
01 983-SMF-2.8/01 91.873.803 983-SMF-4.8/01 92.873.803 30.00
02 983-SMF-2.8/02 91.873.804 983-SMF-4.8/02 92.873.804 40.00
03 983-SMF-2.8/03 91.873.805 983-SMF-4.8/03 92.873.805 50.00
04 983-SMF-2.8/04 91.873.806 983-SMF-4.8/04 92.873.806 60.00
05 983-SMF-2.8/05 91.873.807 983-SMF-4.8/05 92.873.807 70.00
06 983-SMF-2.8/06 91.873.808 983-SMF-4.8/06 92.873.808 80.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.