983-US

Barrier Strip Connector

Screw connection, 1 solder pin per pole, with back barrier

https://wecoconnectors.com/wp-content/uploads/Images/983-US-R.JPG

DESCRIPTION

The PCB connector 983-US with a pitch of 10 mm is a version with framed ribs to realize larger clearance and creepage distances. For wave soldering corresponding slots are necessary in the printed circuit board.

GENERAL INFORMATION

Pitch: 10.00 mm

No. of poles: 2 - 7

Additional information: with plus/minus screw. cross recess: Pozidriv

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.75 - 2.5 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 8.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

3

2

Rated Voltage

800 V

1000 V

1000 V

Rated Impulse Voltage

8 kV

8 kV

6 kV

Rated current: 24 A

Rated insulation voltage: 750 V acc. to EN 60998-1

Hole in PCB: ø 1.6 mm

Torque: 1.2 Nm

Other specifications: Per pole two wires of identical cross-section can be connected.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 600 B, C 20 - 12 1.13
20 600 B, C 20 - 12 1.13
Download PDF How to Order

TECHNICAL DRAWINGS

983-US.JPG - technical drawing 1

MATERIALS

Moulding: PA HT, black, V-0

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 120°C; temporary max. 260°C (15-30 sec)

Pressure clamp: Tin plated brass

Screw: M4; zinc plated steel, blue passivated

Solder pin: 0,8 x 1,0 mm; tin plated brass

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-10,00
  • 10 mm pin length

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 983-US/02 10.873.862 20.00
03 983-US/03 10.873.863 30.00
04 983-US/04 10.873.864 40.00
05 983-US/05 10.873.865 50.00
06 983-US/06 10.873.866 60.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.