110-AP-211
Plug Connector
Screw connection, direct contact to PCB
DESCRIPTION
The plug connector 110-AP-211 as direct connection to PC boards with a pitch of 3,5 mm is available in 2- to 12-pole design. Due to the small pitch, the plug connector is particularly suitable for confined spaces. The high-quality elevator system guarantees reliable connection of all conductor types. Slots corresponding with the housing side walls or the PC board width determine the correct plug connector position on the conductor paths. The board design determines whether the contacting is single- or double-sided. Slots between the plug connections not only to increase the creepage distances in the housing but also serve as receptacle for coding keys.
GENERAL INFORMATION
Pitch: 3.50 mm
No. of poles: 2 - 12
Application: Telecommunication technology, house telephones, intercoms
TECHNICAL DATA
Clamping Range:
0.14 - 1.5 mm² / 0.14 - 1.5 mm² / 30 - 16 AWG
Rated cross section: 1 mm²
Wire stripping length: 6.5 mm ± 0.5 mm
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 3 A for one side PCB contact6 A for two side PCB contact
Rated insulation voltage: 130 V acc. to EN 60998-1
PCB Thickness: 1.4 - 1.8 mm
Torque: 0.2 Nm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 7 | 150 | B | 30 - 16 | 0.23 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Screw: M2; copper alloy, tin plated
Contact Element: Copper alloy, tin plated
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50
- Coding keys 110-AP, Part-No.: 10.496.028
- Factory-assembled coding keys on request
