110-M-215-THR
Header
Horizontal plug-in with anchors
DESCRIPTION
The 110-M-215-THR is a pin strip, suitable for the reflow soldering process, in horizontal design with a pitch of 3,5 mm and available in 2- to 12-pole design. It is compatible to all standard plugs of the series 110 as well as to the Insulation Displacement Connector 110-A-IDC. This version has connecting flanges with thread inserts M2,5 (<0,3 nm) on both sides of the connector which extend range applications additionally. housing pin strips correspond to requirements increased soldering temperatures in lead free process. spacers, so-called stand-offs, ensure a better hot-air circulation during reflow process convection oven and allow an improved visual control solder joint. all thr this series are packed tape-on-reel for automatic pick & place equipped with high temperature resistant caps can easily be removed after
GENERAL INFORMATION
TECHNICAL DATA
Over Voltage Category
III
III
II
Pollution Severity Level
3
2
2
Rated Voltage
160 V
160 V
320 V
Rated Impulse Voltage
2.5 kV
2.5 kV
2.5 kV
Rated current: 8 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 130 V acc. to EN 60998-1
Hole in PCB: ø 1.3 mm
RATINGS
| Current [A] | Voltage [V] | Group | AWG | Torque [Nm] | |
|---|---|---|---|---|---|
 | 8 | 300 | B, D | ||
 | 8 | 300 | B |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Terminal body: Nickel plated brass
Screw: M3,5; zinc plated steel, blue passivated
Solder pin: 0,8 x 0,8 mm; tin plated brass
Tab: Nickel plated brass
Wire protector: Tin plated tin bronze
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-3,50 [1]
- Coding elements 120-K-HT-WS
Notes
STANDARD CONFIGURATIONS
| Poles | Items | Part # | Length L [mm] | Step | 3D PDF |
|---|
