302-FLW-DS

Plug-In Terminal Strip

Screw connection & socket with clamping spring, vertical plug-in

https://wecoconnectors.com/wp-content/uploads/Images/302-FLW-DS-R.JPG

DESCRIPTION

The plug-in terminal strip 302-FLW-DS in 8 mm pitch is available with 2 to 12 poles. It is well suited for applications where space is limited. It has one screw connection per pole and one vertical plug connection for a terminal strip with pins. 302-FLW-DS terminal strips unite contact spring with wire protector which offers good connection performance for applications requiring small plugging and pulling forces and low contact resistance. The wire protection reliably prevents damage to flexible wires by the turning screw. The funnel-shaped insertion bushings guarantee perfect pin guidance and optimum contact protection. Plug-in terminal strips 302-SV or 302-SVG create a plug connection where the connection leads are located in a 90° angle to each other. That way, challenges of limited mounting space can be resolved. These terminals strips can be screw-mounted on a substrate.

GENERAL INFORMATION

Pitch: 8.00 mm

No. of poles: 2 - 12

Usable with: 302-SV(-DS), 302-SVG(-DS)

Application: This plug connector is well suited for applications that require to easily open and close not energised circuits.

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG
0.34 - 2.5 mm² / 0.34 - 1.5 mm² / 22 - 14 AWG

Rated cross section: 1.5 mm²

Wire stripping length: 7 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

160 V

160 V

320 V

Rated Impulse Voltage

2.5 kV

2.5 kV

2.5 kV

Rated current: 6 A

Rated insulation voltage: 130 V acc. to EN 60998-1

Torque: 0.4 Nm

Other specifications: Rated values apply to use in combination with 302-SV(-DS).

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
10 300 B,D 22 - 14 0.4
300 10 B,D,E 26 - 14 0.4
Download PDF

TECHNICAL DRAWINGS

302-FLW-DS.JPG - technical drawing 1

MATERIALS

Moulding: PA, natural, V-2

Comparative tracking index: CTI ≥ 600

Insulating group: I

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M2,6; zinc plated steel, blue passivated

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Marking options on the screw guides
  • Jumper 302-J

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 302-FLW-DS/02 32.820.041 15.00
03 302-FLW-DS/03 33.820.041 23.00
04 302-FLW-DS/04 34.820.041 31.00
06 302-FLW-DS/06 36.820.041 47.00
08 302-FLW-DS/08 38.820.041 63.00
11 302-FLW-DS/11 41.820.041 87.00
12 302-FLW-DS/12 42.820.041 94.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.