961 (-DS)

PCB Connector

Screw connection, vertical wire entry

https://wecoconnectors.com/wp-content/uploads/Images/961-R.JPG

DESCRIPTION

The PCB connector 961 is the horizontal version of 960 with a pitch of 5,08 mm and available in 2- to 32-pole design. It can be mounted side-by-side without pole loss. The wire entrance is vertical to the PCB. Compared to the smaller PCB connector 941, it has a larger clamping range and larger clearance and creepage distances. Wire protection in DS-design reliably prevents damage to stranded wires by the screw. The screws are secured against self-loosening. For the grid connection, these PCB connectors are equipped with a M3 thread.

GENERAL INFORMATION

Pitch: 5.08 mm

No. of poles: 2 - 32

TECHNICAL DATA

Clamping Range:

solid / flexible / AWG

without wire protector

1 - 6 mm² / 1 - 2.5 mm² / 16 - 12 AWG

with wire protector:

0.75 - 4 mm² / 0.75 - 2.5 mm² / 18 - 12 AWG

Rated cross section: 2.5 mm²

Wire stripping length: 5.5 mm ± 0.5 mm

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V

320 V

630 V (500 V)

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 24 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Torque: 0.5 Nm

Other specifications: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types: "no-flame" acc. to glow-wire test.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B 22-12 [1] 0.51
10 300 D 22-12 [1] 0.51
20 300 B 26 - 12 0.51
10 300 D, E 26 - 12 0.51
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
24 400 2.5
Download PDF

TECHNICAL DRAWINGS

961.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-32 poles: CTI 400

Insulating group: 2-8 poles: I; 9-32 poles: II

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Screw: M3; zinc plated steel, blue passivated

Solder pin: ø 1 mm; tin plated brass

Wire protector: Tin plated tin bronze

OPTIONS / ACCESSORIES

  • Consecutive numbering
  • Special marking according to drawing
  • Self-adhesive marking strip BST-5,08
  • Version with extended wire entrance
  • Double wire protector as bridge

Notes

STANDARD CONFIGURATIONS

Poles Items Part # Items Part # Length L [mm] Step 3D PDF
02 961/02 10.878.102 961-DS/02 20.878.102 11.16
03 961/03 10.878.103 961-DS/03 20.878.103 16.24
04 961/04 10.878.104 961-DS/04 20.878.104 21.32
05 961/05 10.878.105 961-DS/05 20.878.105 26.40
06 961/06 10.878.106 961-DS/06 20.878.106 31.48

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.