970-FB

Socket Terminal Strip

Plug connection

https://wecoconnectors.com/wp-content/uploads/Images/970-FB-R.JPG

DESCRIPTION

The socket terminal strip 970-FB with a pitch of 5 mm is available with 2 to 32 poles. In order to achieve higher housing strength, these socket terminal strips cannot be mounted side-by-side without pole loss. It is suitable for a perpendicular connection of two PCBs when using male pin strips of the series 971-SLR, -SLS oder –SLW. For this version, the plug direction for mating connectors is parallel to the PCB. The contact pressure is achieved by means of a stainless steel spring with extra-long spring deflection. Due to the high spring forces, it is advisable to select socket terminal strips with only up to 8 poles. For longer clearance and creepage distances, socket terminal strips are also available in a larger pitch. The socket terminal strip 970-FB only differs from the smaller 950-FB version by the M3 screws and longer clearance and creepage distances. It is fully compatible to versions 951-SV, 97..-FBW and -FBS.

GENERAL INFORMATION

Pitch: 5.00 mm

No. of poles: 2 - 32

Usable with: plugs with 971-SV series

TECHNICAL DATA

Over Voltage Category

III

III

II

Pollution Severity Level

3

2

2

Rated Voltage

250 V (200 V)

320 V

630 V (400 V)

Rated Impulse Voltage

4 kV

4 kV

4 kV

Rated current: 6 A

Rated insulation voltage: 250 V acc. to EN 60998-1

Hole in PCB: ø 1.3 mm

Other specifications: Voltage data in brackets are valid for 9-32 poles types. 2-8 poles types are "no-flame" acc. to glow-wire test.

RATINGS

Current
[A]
Voltage
[V]
Group
 
AWG
 
Torque
[Nm]
20 300 B
10 300 D
20 300 B
10 300 D, E
Current
[A]
Voltage
[V]
Cross Section
[mm2]
AWG
 
TORQUE
 
17.5 250
Download PDF How to Order

TECHNICAL DRAWINGS

970-FB.JPG - technical drawing 1

MATERIALS

Moulding: PA, grey, V-0

Comparative tracking index: 2-8 poles: CTI ≥ 600; 9-32 poles: CTI 400

Insulating group: 2-8 poles: I; 9-32 poles: II

Temperature range: -40°C up to 100°C

Terminal body: Tin plated brass

Spring: Stainless strip steel

Solder pin: ø 1 mm; tin plated copper alloy

OPTIONS / ACCESSORIES

  • CN: Consecutive Numbering
  • SM: Special Marking (please provide sketch) 
  • G05: Gold Plating (5 micro inches) 
  • G30: Gold Plating (30 micro inches) 
  • S30: Silver Plating (30 micro inches) 
  • WG: Wire Guide
  • Self-Adhesive marking strip BST-5.00
  • Different pin lengths
  • Version with 10 mm spacing

STANDARD CONFIGURATIONS

Poles Items Part # Length L [mm] Step 3D PDF
02 970-FB/02 80.872.052 11.00
03 970-FB/03 80.872.053 16.00
04 970-FB/04 80.872.054 21.00
05 970-FB/05 80.872.055 26.00
06 970-FB/06 80.872.056 31.00

Did you find the information you were looking for ?

Click on a star to rate your experience.

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.