Pin Strip for THR
Soldering/plug-in area ø 1.3 mm
971-SLR-THR-1,3 is a pin strip with a pitch of 5 mm for the application in a reflow soldering process. The high temperature resistant plastic housing has a very high CTI value and is equipped with spacers, so-called "Stand-offs", which ensure a better hot-air circulation during the reflow soldering process in the convection oven. Beyond this, they assure an improved optical control of the solder joints. The pin strip 971-SLR-THR-1,3 comes with a constant pin ø of 1,3 mm and is usable with all WECO plug connectors (see general information). Furthermore we recommend this pin strip for small numbers of poles and for the series of 115-F for all numbers of poles. The obtained plug-in and pull-out forces are comfortable. For the automatic assembling all pin strips of this series are packed in Tape-on-Reel and equipped with high temperature resistant Pick Caps, which can easily be removed after the soldering process.
Pitch: 5.00 mm
No. of poles: 2 - 12
Usable with: plugs with 115-F, 950-FL-DS, TFL-DS, NAF-DS, GFL-DS, NLFL-DS, RFL-DS series
Over Voltage Category
Pollution Severity Level
Rated Impulse Voltage
Rated current: 10 A
Soldering Process: Wave solder & reflow solder
Rated insulation voltage: 250 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Moulding: PA HT, black, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 120°C; reflow solder temperature peak max. 255°C acc. to DIN EN 61760-1
Solder pin: ø 1.3 mm; tin plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-5,00
- TR: Tape and Reel Assembly (Includes pick surface)
- Other solder pin surfaces on request
We are sorry that this post was not useful for you!
Let us improve this post!
Tell us how we can improve this post?