983-FS
Tab/Screw Connector Block
Tab/screw connection, 1 solder pin per pole
DESCRIPTION
On the input side, each pole of the tab connector 983-FS in 10 mm pitch can be connected to up to 6 tab connections or one screw connection. For a uniform assembly, version, assembly type (4-digit number) and number of poles must be specified. Both technical drawings (A and B) show an example for uniform assembly. Mixed assembly requires either specifications of the terminal design for each pole or a drawing. Due to the multitude of assembly combinations there is no designated order code. For uniform assembly with screw connections (8.190) see tab connector strip 983-S.
GENERAL INFORMATION
Pitch: 10.00 mm
No. of poles: 2 - 26
TECHNICAL DATA
Clamping Range:
0.5 - 2.5 mm² / 0.5 - 2.5 mm² / 20 - 12 AWG
Rated cross section: 2.5 mm²
Wire stripping length: 8.5 mm
Over Voltage Category
III
Pollution Severity Level
3
Rated Voltage
320 V
Rated Impulse Voltage
4 kV
Rated current: 16 A: with receptacles 4.8; wire 2.5 mm² (14 AWG)
Rated insulation voltage: 450 V acc. to EN 60998-1
Hole in PCB: ø 1.6 mm
Torque: 1.2 Nm
Other specifications: For screw connections, 2 wires of the same cross-section can be connected per pole. The specified rated voltage applies to applications with insulating receptacles.
RATINGS
|
Current [A] |
Voltage [V] |
Group |
AWG |
Torque [Nm] |
|
|---|---|---|---|---|---|
|
15 | 300 | B | 20 - 12 | |
|
15 | 300 | B | 20 - 12 | |
| 10 | 300 | D, E | 20 - 12 |
TECHNICAL DRAWINGS
MATERIALS
Moulding: PA, grey, V-0
Comparative tracking index: CTI ≥ 600
Insulating group: I
Temperature range: -40°C up to 100°C
Pressure clamp: Tin plated brass
Screw: M4; zinc plated steel, blue passivated
Solder pin: 0,8 x 1,0 mm; tin plated brass
Tab: Nickel plated brass
OPTIONS / ACCESSORIES
- Consecutive numbering
- Special marking according to drawing
- Self-adhesive marking strip BST-10,00
- Cover cap 983-A (two unassigned poles required); not suitable for every assembly type
- Crosshead screws
- 10 mm pin length
- Version without solder pin
- Version with screw connections only, please see 983-S
STANDARD CONFIGURATIONS
| Poles | Items | Part # | Length L [mm] | Step | 3D PDF |
|---|
